Pasture ready squeeze chute transport

When your chute is loaded on Hi-Hog’s squeeze chute trailer you will have 7 3/4” inches of clearance below the trailer frame to help you negotiate your pastures bumps.

The draw-bar is designed to give you lots of control for backing your chute into position and enough tongue length to allow for sharp turns.

Note: tie-down straps not included.

Product Features:

• 7 3/4” of clearance below the trailer frame

• 10 of clearance below the squeeze chute floor

• The hitch coupler will fit a 2” ball. 

• Draw-bar designed for improved control for aligning with squeeze chute. 

• Spring loaded quick-hooks 

• Includes new 205/75 D15 tires

Specifications: 

• Item Number 1543

• Item Weight 662 Lbs

• Axle Capacity 3,196 Lbs

• Length of trailer frame 14’-9 7/8”

• Length – with hydraulic chute loaded 15’-10”

• Height – with hydraulic chute loaded 9’-5”

• Height – with hydraulic chute built after 2016 8’-10 1/4”

• Length – with manual chute loaded 15’–5”

• Height – with manual chute loaded 7’-11”

• Length of towing tongue (draw-bar) 5’-1 7/8”

• Width – To outside of trailer wheels 6’-3 1/16”

• Height from grade to top of 2” towing ball 15”

Note: when transporting the hydraulic squeeze chute, we recommend the hydraulic pump is stored ahead of the trailer axle (closer to the trailer hitch) to ensure the recommended hitch weight is maintained.

If you are loading any other items in the chute they should be located so the balance of the load is slightly forward on the tongue side of the trailer axle. This will minimize the risk of trailer tail swing. Do not overload the tongue or axle.